Air Handling Units
- Suitable for Indoor & Outdoor installations
- Airflow range from 941 cfm to 67,951 cfm
- Static Pressure upto 1000 Pa
- Extruded aluminum profile framework
- Polyurethane panel insulation (mineral wool option available)
- Standard casing made of 50mm thick double skin panels
- Heat Recovery Wheel, Heat Pipe & Plate Heat Exchanger option available
Fresh Air Handling Units
- Available in 31 sizes with airflow ranges from 1,000 CFM to 42,000 CFM
- Eurovent certified (Class – D1, L1, T2, TB2, F9)
- Framework – Extruded
- Anodized Aluminum with Thermal Break Profile
- Casing 50mm thick, Double Skin Insulated Thermal break Panels
- Stainless Steel drain pan standard
- Customized units available
- IE2 high efficiency motors as standard
- Fans are AMCA certified
- Heat recovery wheel, Plate heat exchanger, Vertical heat pipe
Fan Coil Units
- Capacity range: 200 – 2000 CFM
- Available in AC and DC motor
- Chiller/District Cooling application
- Power Supply: 220-240/1Ph/50Hz motor low noise 3 speed unit with various static pressure
- Blue fin coating as standard
- Factory-installed electric heater as optional
- Standard extended drain pan with special coating on drain pan to avoid algae formation
Ecology Unit
- Effective 4 stage filteration with odor removal system
- Washable type, 1 inches thick metallic panel filters, along with ESP
- Electrostatic Precipitator of plate type filter cell having fumed and mist elimination efficiency ≥ 95%.
- Available in programmable auto wash option.
- Disposable type 2 inches thick synthetic panel filters, G4 class, dust weight arrestance more than 90% as per ISO 16890 standards.
- Disposable type, 24 inches deep, synthetic pocket filters, ISO EPM1, dust spot efficiency between 80 to 90% as per ISO 16890 standards
- Refillable type, 18 inches deep, canister type activated carbon filters.
- Cassette type/Carbon KMNO4 blended filter as an optional
- UV lamps as an optional
- AMCA Certified Centrifugal fans
- SISW fan with TEFC motors outside air stream as per DM standard (option)
- IP55 degree of protection, Class F insulated, VFD compatible electric motors.
- Custom built units to suit site requirements.
- Based on project need, Disposable type, 12 inches deep, High Efficiency particulate air filter, H13 and H4 class as per ISO 16890 standards
ERV
DERV (Dehumidification & Energy Recovery Ventilator)
These units represent a significant advance in ventilation technology for residential and light commercial spaces. The purpose-designed units are ideal for ventilating spaces, which are characterised by both high temperatures and high humidity levels.
DERV DX
If a supply of chilled water for the cooling coil is not available then DERVDX units, which use DX evaporator coils as the cooling coils, can be used. They are supplied with a matching condensing unit for outdoor installation.
The DERV range is available in three chilled water sizes and 4DX versions denoted by the nominal throughput of air: 150, 250, 375 and 500 (litre/second).
Energy Recovery Ventilation units (without chilled water or DX component)
ERV containing only heat recovery pipes and air moving equipment, is available as well. ERVs use the cooling potential of the extract air to provide ventilation air to space, which has been pre-cooled to an acceptable level, though without the benefit of significant dehumidification.
Quality Standards
All DERV units are tested in line with ARI 1060 (Performance rating of air to air heat exchangers for energy recovery ventilation equipment) and ANSI/ASHRAE 84 (Method of testing air to air heat exchangers).
